Your room, tile, pattern, waste and grout settings go here, and the plan and the count appear as you change them.
Free Tile Planner
Plan your tile layout and count every tile
Tily's tile planner lays every tile in your real room, so you know how many to buy before you order. Enter the room size, choose a tile and a pattern, and the planner counts whole tiles and cut pieces separately, then adds a waste allowance on top.
It works for awkward rooms as well as simple ones: L-shapes, alcoves and angled walls. It runs in your browser, with nothing to install and no account to create.
How to plan your tiles
- 01Enter your roomType the width and depth of the room, or its area. L-shapes and alcoves work too.
- 02Pick a tile and patternSet the tile size and grout width, then choose a straight, brick bond, diagonal or herringbone layout.
- 03Get the countWhole tiles and cuts are counted separately, then the waste % you set goes on top. You get the total to buy.
Why plan instead of just dividing the area
A quick sum divides the floor area by the size of one tile. That works for an empty square room, but real rooms have corners, doorways and walls that are never quite straight, and every one of them means cut tiles. Laying the tiles out shows where those cuts fall and how many there are.
- See where the cuts land before you start, including the thin slivers along a wall that are easy to miss.
- Compare patterns on the same room: herringbone and diagonal layouts need more cuts than a straight grid.
- Check the waste allowance against the cuts the plan actually shows, rather than guessing it.
- Take the plan to the shop or hand it to your tiler as a printable PDF (part of the Tile Pack).
Questions
- Is the tile planner free?
- Yes. There's nothing to install and no account to create. Draw as many rooms as you like. The plan and the tile count are free; a printable PDF and previews of your own room are part of the Tile Pack.
- How is this different from a tile calculator?
- A calculator divides the floor area by the tile size. The planner lays every tile in your real room shape and pattern, so the count includes the actual cuts at walls and corners.
- How much waste should I allow?
- About 10% for straight and brick bond layouts and 15–20% for diagonal and herringbone. Set the waste % to match; the planner shows the tiles you'll cut, so you can check the allowance against your room.
- Which patterns can I plan?
- Straight, brick bond (half-tile offset), diagonal and herringbone. Choose any tile size, a grout width and the waste percentage you want added.
- What do I need to measure?
- The length of each wall along the floor, and the tile size from the product page or the box. For an L-shaped room or an alcove, measure every wall rather than just the longest two.
- Can I save my plan?
- Yes. Your plan stays in this browser, so it is still there when you come back. The Tile Pack gives you a printable PDF to share with your tiler or the shop.
- Can I put this planner on my tile shop's website?
- Yes. The Tile Planner is an embeddable widget for tile shops. It shows your products, uses your branding and puts the right number of boxes in the basket.